When you buy a mould cleaning product, you just want it to get the job done… as long as the product is safe to use.  After lots of testing, trial and error, we have put together the best mould removal formula that does exactly that… finishes the job off effectively, quickly and easy. (Indoor and outdoor).

Here are some of the applications you can use our non-toxic  mould removal products for, and what they are best used on:

• Around Windows & Aluminium  Window Frames
• Black Mould on Bathroom Shower Curtains, Ceilings, Walls, Shower Tiles & Grouting
• Basements
• Bricks
• Outdoor Umbrellas
• Weatherboards
• Curtains, Linings, Drapes, Thermal Backed
• Concrete
• Driveways
• Laundry
• Linen
• Materials
• Washing Machines
• Paint, Painted Walls, and Paintwork
• Pavers
• Plastic
• Tents
• Caravans – Fabric and Canvas Awning
• Rubber,
• Roman Blinds
• Clean Mould off Fridge Magnet Seals Around Doors
• Showers
• Canopies
• Vertical Blinds

Depending on the nature of your mould growth, and the surface it is growing on, you may need to buy a different strength formula. We have a mould cleaning product suited to all the above applications. Feel free to email us if you aren’t sure which product to order at lab@removehousemould.co.nz

Thousands of other home owners and commercial companies use our cleaning products, so you should give us a go also!

Note: For stubborn mould growth, in some cases you may need to give the effected area a slight scrub or water blast.

How much does it cost to clean curtains? It can get very very expensive. When working out the overall price to expect, you also need to factor in the following:

•  The time it takes to unhitch them,
• The mould spores you will ‘flick’ around the room in the process,
• You need to fold them up correctly so the stitching doesn’t pull,
• You need to drive them down to the cleaners
• Could the stitching come undone is the process of cleaning them? 
• Is there a risk of the curtain getting damaged in the process
• Could the colours run?
• You then need to collect them and PAY the BILL … (Could be up to $1000 for a house lot of curtains… ouch!)
• Then you have the time to rehang them.

Wouldn’t it be easier & cheaper to order the ‘Curtain Magic’ mould cleaning product and eliminate all the above?

Curtain Cleaners: Ashburton, Auckland City, Blenheim, Christchurch, Coromandel, Dargaville, Dunedin, East Auckland, Gisborne, Greymouth, Hamilton, Hastings, Invercargill, Lower Hutt, Manukau, Masterton, Matamata, Napier, Nelson, New Plymouth, Nth Shore, Orewa, Palmerston North, Papakura, Queenstown, Raglan, Rotorua, South Auckland, Taupo, Tauranga, Timaru, Upper Hutt, Waiheke Island, Waikanae, Warkworth, Wellington, West Auckland, Whangarei

You are about to witness a LIVE video demostration of our ‘Outdoor Magic’ Mould, Moss and Algae remover. This is a short unedited video of mould vanishing off an external cladding surface of an NZ house.

Take a few minutes to watch this video… you will quickly see we have the best cleaning product in NZ to clean ugly looking gunge off the outside of your house… with no scrubbing required!

www.youtube.com/watch?v=NBrlFFjuaNY

Ok… it’s not the most professional video you’ve ever seen, but we did this on purpose so you know we haven’t used any ‘tricky’ editing tools… the footage is as raw as it gets!

This moss, mould and gunge removal product is excellent on multiple outdoor surfaces like, fences, retaining walls, cladding, synthetic grass, tennis courts, bricks, fibro and many more.

Looking for a super fast solution to get rid of oil stains off concrete?

We have quickly become famous in NZ for our curtain mould cleaning products that make mould vanish within minutes, and now the laboratory has formulated a new product that has the same effect with cleaning oil stains off any concrete surface! Now you can make your concrete driveway or footpath look like new with our driveway cleaning products… ready to deliver to you today!

Our driveway oil remover is the best you will find, and makes waterblasting a pleasure! All you need to do is soak up the bulk of the oil with paper towel, then spray our Oil Stain Removal product. Wait 3 minutes and watch the difference!

Now you are ready to blast it off with a water blasting machine… or even better still, save the money of hiring a water blaster company and scrub the subject area yourself with soap and water and heavy duty brush.

This is really quick and simple to do… and you won’t find a better concrete cleaning product anywhere… it’s been formulated to work fast, and it comes mixed and ready to go!

This product is available by request only – email order@removehousemould.co.nz - (4 Ltrs $59.95)

Now you can simply spray our specialised textured ceiling cleaner mould and smoke stain cleaner on, and watch the stains vanish!

There is nothing more ugly aa stained ceiling… it makes your house look and feel old, untidy and unloved! (Especially after tenants have been smoking in the home!)

One of the other main contributors to a mouldy ceiling is little sections of missing insulation in the corners and around the edges. The reason the mould grows in these areas is because the cold moist air in the room accumulates where the ceiling is coolest… hence mould growth is certain areas of the ceiling and not others… especially on textured ceiling surfaces.

Here’s a before and after photo using the ceiling stain and mould cleaning product…

This product is perfect for home owners for private use, cleaning companies for commercial use (Will make your job real easy), and property managers who are looking for the quickest and easiest way to clean mould after a tenant moves out!

To order the above product, please select the ‘Ceiling and Wall Mould Remover‘ in the drop down menu below.

Do you smell a damp odour in some rooms of your property, or your gut feeling tells you there could potentially be a serious moisture problem or leak?

We use one of the most advanced, fast and cost effective ways to determine if you have leaks or moisture problems… without putting any holes in your wall! Infrared thermal imaging cameras can detect leaks that are causing problems behind the wall.

The first step is to use the mould removal spray on this website, and if the mould reappears in a short amount of time, you know the issue is more than meets the eye. Here’s an example of what an infrared camera sees…

This infrared photo shows moisture under the carpet that the human eye could not see.

Here’s another photo of a simple hidden leak under a window that could be causing toxic black mould growth behind the wall, allowing dangerous mould spores to potentially enter the room through any gaps around the window frame…

If you suspect the mould problem is simply surface mould, then purchase the relative mould cleaning product on this website which suits your needs… just like many other clients do each week. If you feel the problem is deeper and potentially originating from behind the wall, then we can give you a free quote via email for an infrared thermal moisture scan of your house.

If you would like to book a thermal imaging inspection, email us the size of your home (in square meters), and the suburb the property is located. We will come back to you in the next 12hrs with a free quote.

Email us at lab@removehousemould.co.nz today with the details of the job, and we’ll get right back to you with a free quote!

DESCRIPTION: A mildly alkaline biodegradable algae and moss removal solution whose action is brief and instant because of its combination with organisms and organic matter. Prevents new growth for approximately 18 to 24 months and possible longer depending on the rainfall and foliage cover
USES: Removes black algae, moss and green slime from dairy sheds, concrete driveways, walkways, paths, paving, synthetic grass, hard courts, roofing, brick, concrete or stonewalls and Mondo running tracks.
APPLICATION: For best results on a porous surface, hose down first and wait until all surface water drains off leaving a damp look. The product can be applied with a hand sprayer, watering can. Or simply poured on and moved around with a broom. Heavily affected areas may need a second application or a rub with a stiff bristled broom to loosen the build up.
SYNTHETIC GRASS COURTS: When treating a synthetic grass court for algae and moss, begin cleaning at the high point. Work in sections (we recommend an area of the full width of the court by approximately 2 meters in length) Flood the carpet with water, when carpet is full pour the product on top. The algae/moss remover will begin to work instantly on the tennis court and as the water recedes it will be pulled down through the carpet / turf and san completely cleaning it. Heavily affected areas may require some scrubbing with a stiff bristle broom. Continue procedure for full length of the court.
HARD COURTS: Hose down affected area then remove all surface water by brooming off excess leaving the surface damp. Spray the product on or pour onto surface and distribute evenly with a soft bristle broom. Hose down thoroughly to complete. Continue procedure for full length of court.
ROOFING: Here’s how to clean algae and moss off a roof using this organic cleaner. Work on a cold surface and out of direct sunlight to avoid product evaporating or drying out too quickly. Early morning or late afternoon is ideal. Hose down area to be cleaned (we recommend an area of 2 meters wide and the full height of the roof) When all surface water has run off, spray the product on liberally starting from the top and working down. Due to rapid run off second applications are often required. Some scrubbing with a stiff bristle broom may also be required. Hose thoroughly removing all trapped dirt and grime to complete

Algae / moss remover will not harm plants provided they are hose down well should they come in contact the product. The product is unique in the way it works and its lasting effects. We know you will be more than satisfied with the product however.

—————–

IDENTIFICATION
PRODUCT NAME:                                 Algae / Moss Green Slime Remover
TRADE NAME:    CLEANING PRODUCT
OTHER NAMES:    N/A
UN NUMBER:    1791
DANGEROUS GOODS:   8 Corrosive
SUBSIDIARY RISK:   N/A
HAZCHEM CODE:   2R
POISONS SCHEDULE:   S5
USE: For removal of algae/moss and green slime from concrete, bricks and tennis courts (any kind) Mondo running tracks

PHYSICAL DESCRIPTION
PROPERTIES: 50g / clear yellow / green liquid
BOILING POINT: Evolution of poisonous gases if heated
VAPOUR PRESSURE: N/A
FLAMMABILITY LIMIT: None
ACTIVE INGREDIENTS: Liquid Chlorine pH 7.5

HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
EYES: Corrosive
SKIN: Corrosive
INGESTION: Corrosive
INHALATION: N/A
FIRST AID
EYES: Rinse immediately with copious quantities of water, seek medical advice
SKIN: Remove contaminated clothing and wash immediately with copious quantities of water
INGESTION: DO NOT induce vomiting. Give plenty of milk or water and seek medical advice

PRECAUTIONS FOR USE
EXPOSURE LIMITS: N/A
VENTILATION: Use in well ventilated areas
PERSONAL PROTECTION: Wear protective clothing and glasses. Avoid breathing vapour or spray mist. Wash hands after use
FLAMMABILITY: The product is not flammable
STORAGE / TRANSPORT: Store in a cool dark place away from sunlight
SPILLAGE PROCEDURE: Flush with copious quantities of water
WASTE DISPOSAL: Flush to drain
FIRE HAZARD: N/A
EXPLOSION HAZARD: N/A
FURTHER COMMENTS: Avoid contact with acidic compounds as chlorine gases will be released. READ LABEL INSTRUCTIONS BEFORE USE

Composition: A mildly alkaline biodegradable solution whose action is brief and INSTANT because of its combination with organisms and organic matter. Also acts as a sterilizer, bactericide, fungicide, disinfectant, kills germs and is biodegradable.

Uses: Removes mould and mildew from most sealed surfaces. Use on ceilings, internal & external walls, wallpaper, shower screens, prams & strollers, annexes, tents, boat canopies, outdoor furniture, eaves, rails, guttering etc.

Applications: Ceilings, Walls & Wallpapers – The most effective method for ceilings and walls is to spray the product on,. We recommend a MIX OF 120MLS CONCENTRATE & BALANCE WATER TO 1 LT. Working steadily cover all areas well. After all traces of mould have disappeared, use a slightly damp sponge to wipe off excess moisture. We recommend spraying wallpaper for best results. Work from the bottom up to prevent streaking. Streaking occurs when spraying begins at the top and excess product runs down the walls leaving clean lines. To eliminate streaking spray the entire area from the bottom and work up.

 Once the area has been cleaned and all traces of mould have disappeared, wipe area well with a clean dry cloth to remove excess solution. Wallpaper should be tested for colourfastness first.

Bathrooms – Bathroom silicon is generally a difficult problem because mould forms beneath the silicon and is protected by it. To treat always begin with a dry surface (excess water will dilute the product) spray each morning and night for a week. A mix of 1 PART CONCENTRATE & 3 PARTS WATER is required to clean this area The product will penetrate the silicon and the mould will disappear.

Annexes, Tents & Boat Canopies – Because annexes and tents are usually waterproof both sides will need to be treated. Begin from the bottom and working up to prevent streaking, spray product evenly. A MIX OF 1OOMLS CONCENTRATE TO 1 LT OF WATER Wait 3 to 5 minutes for mould to disappear. Re-apply to any areas you may have missed remembering to apply both sides then WIPE down annex or tent and allow to dry before storage. Boat canopies most often form mould on the underside. Spray entire area liberally and when all traces of mould have disappeared, WIPE thoroughly. All annexes, tents and boat canopies must be tested for colourfastness and retention of waterproofing capabilities first.

Outdoor Furniture, Prams & Strollers – Spray liberally onto affected areas and wait 3 to 5 minutes. Cushions should be sprayed from both sides because these are the items we sit on and serve food on, hose down thoroughly and leave to dry. Heavily affected areas may require further applications. Use the same procedure for prams and strollers but remember to check for colourfastness first and to hose down thoroughly when complete. A MIX OF 1 PART CONCENTRATE & 3 PARTS WATER FOR BEST RESULTS

Outdoor Walls, Eaves, Guttering & Rails – Spray affected areas liberally. Avoid working in the full sun or on a hot surface, as the product will dry out before it has had a chance to work. Because the product is mildly corrosive hose down all metal surfaces thoroughly when all traces of mould has disappeared.

Smoke Stains – Although not designed for this purpose, the product is brilliant for cleaning smoke stains usually occurring on walls and ceilings. Visible as a general yellowing of paint, smoke stains will occur right throughout the home but are more visible in the kitchen due to general cooking and the lounge room due to smoking. Using a sponge will remove most of the stains, however for the best results we recommend spraying the product on. using a MIX OF 1OOMLS CONCENTRATE TO 1 LT OF WATER The reaction is instant leaving the surface looking pristine and freshly painted (repainting will still be required if the paint is cracked, peeling or scuffed). Wipe excess moisture off using a clean dry cloth.

NZ OWNED MOULD CLEANING PRODUCT!

We have a shower to get clean, but what about our bare feet rubbing across disgusting slimmy mould in the grout? It won’t actually feel slimmy, but you know that if you tested your skin cells for traces of mould after a shower (or walking into a bathroom), then there’s a good chance it will come up positive.

The other downside to mould in grout, is that it looks very ugly! What would your visitors think when they use your toilet whilst visiting you, and they glance into your shower and see how dirty it is!

So, how do you clean mould out of grout?

There is no time like now to clean up the grout mould… it’s not going to get any better! Keep your family healthy today…. it’s quick to apply, works fast and all with minimal effort on your behalf.

The easiest way to seal a shower screen is with silicone, but unfortunately silicone is an excellent breeding ground for mould in NZ.

Don’t you think it’s ironic how people take a shower to get clean, but the shower itself is actually dirty, mouldy and almost feels like the mould buried in the silicone makes you want to get out of there as quick as possible?

The good news is that we can send you a specially formulated ‘silicone cleaning’ formula made for removing and getting rid of mould out of silicone… fast!

——————————————————-

From: Shed Shop
To: order@removehousemould.co.nz
Sent: Monday, November 07, 2011 2:03 PM
Subject: Re: Silicone Mould Remover

“Thanks so much for the Silicone Mould Remover – Finally got around to using it – It is a fantastic product too – I have tried everything else to no avail and one treatment has nearly got rid of it all. Will spread the good word.”
Regards, Lynda Middleton

——————————————————-

 Order today below!